This website use cookie for analytics data and to enhance the user experience.

Close

Technologies

eVent FABRICS

Breathable shelter from the storm

eVent is an air permeable and waterproof membrane: a "dry system" that instantly vents the moisture that typically builds up inside your garments as you sweat. Our proprietary waterproof and windproof membranes feature bilions of microscopic pores that allow sweat to quickly evaporate to the outside, keeping you dry on the inside and performing at your best.

BONDED TECHNOLOGY

The “bonded technology” allows to put together two fabrics without using the standard seams: they are superimposed with a special scotchtape that gives flexibility, resistance and absolute comfort on skin. The "bonded technology" guarantees a technical and fashion effect, together with absolute comfort and resistance, similar or superior to an ordinary seam.

BODY MAPPING

The Alé Body Mapping System studies the functionality of the garment during the ride. The position of the fabrics is selected considering ventilation, breathability and protection.

ZERO FRICTION

The new bib Zero Friction eliminates the rubbing on skin because materials are dye cut and put together with the “Bonded technology”. The fabrics are soft, thin but resistant.

OPEN BIB

The new “Open” bibs are pierced for a better breathability and to reduce the covering during the hottest seasons. The opening on the back facilitates the perspiration and ventilation.

FREE SYSTEM BIB

Lightness, quick drying and comfort are the main features of this new elastic that gives support to the shorts without constriction. The dye cut and the thin elastic layer are both comfortable and tight on skin.

J STABILITY SYSTEM

Elastic system made in double-layer fabric: a carbon fabric outside and a pierced fabric inside to ensure a better breathability. This shaped elastic keeps the garment in place while cycling with a perfect fitting.

LEG STABILITY SYSTEM

It is the elastic band used in the bottom of the bibshorts. Leg Stability System is printable, ultra thin and keeps the garment in place thanks to the silicon threads interwoven through the fabric. In this way we have the perfect compression without constriction.

EVO STABILITY SYSTEM

New elastic system for the bottom of the bibshorts. The band is elastic with a nonslip threads: it is like a second skin that keeps the bibshort in place without constriction and creates a compression effect that helps the performance.

WR TRATTAMENTO IDROREPELLENTE

WR “water-resistant” treatment is applied on summer fabrics and has important features: humidity and filfth can’t penetrate the weave and gives a dry sensation on skin maintaining the garment’s breathability.

Jerseys

RIB 1.30

Fabric made with a new generation spun yarn of polyester fiber and bioceramic materials with a rib structure that reduces the contact points of the fabric on the skin, maintaining an ideal body temperature in all the weather conditions. The bio-ceramic protects from harmful ultraviolet UV-A and UV-B rays and is an active barrier against sun heat for long lasting freshness during the sport activity. The emission of FIR (Far Infrared Rays) enhances the body’s microcirculatory system and strengthen the metabolic system.
Weight 130gr/mq.
UPF 50+

MICROFORATO

Incredibly light and stretch, this fabric has an extremely fine gauge and it is a polyester micro-fiber with a structure that gives a micro-compression effect and high coverage. The micro perforations on the external surface improve ventilation and quick-dry.
Weight 130gr/mq.
UPF 50+

AIR

Micro mesh extremely stretchable material used in the dye cut bottom sleeve hems. Very comfortable and lightweight.
Weight 150gr/mq.
UPF -

MESH DRAGON

Extremely thin micro mesh material with soft hand touch used for the ventilation and the aerodynamic effect management thanks to its structured pattern that creates micro turbulences reducing the aerodynamic impact.
Weight 80gr/mq.
UPF -

RIPEX

Structured micro polyester fabric with a rip stop construction with push/pull effect for a better transpiration. The openwork structure allows the fabric to dry even quicker. Moreover the fabric grants maximum comfort thanks to its stretch properties that do not limit any movements.
Weight 110gr/mq.
UPF -

LANA SPORT

Merino Wool fabric that dries quickly and gives the skin a microclimate suitable for the cooler temperatures. Wool is a natural soft and comfortable fiber as well as highly breathable and helps the regulation of the body temperature both in hot and cold conditions.
Weight 125gr/mq.
UPF 50+

TRIANGOLO CARBON

Triangle structure fabric with a carbon yarn, quick drying. The carbon favours the wellness sensation by absorbing and dissipating electrostatic charges in the atmosphere. Moreover, it protects the body from the UV rays and it is naturally antibacterial. The carbon fibers allow a quick vapour elimination thus keeping the skin dry and fresh.
Weight 110gr/mq.
UPF 50+

PIUMA

Mesh like fabric in micro polyester with a double density structure, highly breathable and quick drying that provides a minimal protective effect but it grants an elevated air flow for a maximum ventilation. This fabric has no UV protection.
Weight 100gr/mq.
UPF -

PUSH PULL

Lightweight smooth fabric in polyester with a two-face construction and different thickness yarns that allow the best transportartion of the body vapour to the outside. Very quick drying. Reduced thickness and good elasticity.
Weight 100gr/mq.
UPF 50+

ACCOPPIATO TERMICO

The ACCOPPIATO TERMICO fabric is a bonded 3 layers fabric. The exterior is made in a structured knit. In the central layer there is a stretch Windtex membrane that protects from the wind but allows breathability. Closer to the skin a soft and smooth hydrophilic fabric retains body heat while protecting the athlete from the cold, and speeds moisture away from the skin fastly.

DOLOMITI

A winter material in nylon micro-fibre and elastomer. Dolomiti effectively eliminates the skin humidity and retains the body heat. It is the ideal fabric for winter jerseys in terms of softness and elasticity.
UPF 50+.

DRYARN®

Micro-fiber in polypropylene, resistant but light, insulating but breathable and natural. Dryarn® micro-fiber is used in accessories and seamless underwear because it overcomes the most impossible challenges, in any condition: lightness, resistance, breathability, fit and ability to retain the body heat.

EYELET CARBON

Eyelet fabric with carbon in the structure to improve performance and breathability thanks to small holes in the surface. The carbon is used to improve wellness, dissipating the electric charges in the atmosphere, and thanks to its anti-bacterial characteristics. Moreover, the carbon improves blood circulation and reduces the accumulation of lactic acid in the muscles.

FUTURE MULTILIGHT HT

A super light 3 layer fabric used for winter jackets and with a protective effect and limited bulk. The external smooth layer is flat and aerodynamic to facilitate the air slipping.

FOREVER FUTURE WR

Technical 3 layer fabric with windproof, breathable and lightweight properties. The external smooth layer is flat and aerodynamic to facilitate the air slipping. The interior layer has a horizontal lines structure that facilitates the expulsion of perspiration.

ICONA

It’s a fleece thermal material completely made of elastic polyester fabric, with a squarelike internal structure that reduces the points of contact with the skin thus creating a warm and constant body microclimate.
UPF 50+.

INSTINCT GZ

It is a Microsense microfiber fabric of great comfort and innovative technology. The fibers have a high breathability and lightness in contact with the skin. Its flat and close structure has a windproof property.

ISCHIA GARZATO WR, SIMPSON GARZATO GZ

Ischia and Simpson are 3 layers fabrics with flat and light layers. The solid membrane has windproof and breathable properties. The external WR treatment increases the water repellency.

LAMINATED 3L LIGHT (DVstretch)

A long research has allowed the development of a laminated and windproof fabric with membrane, eVent DVstretch, featuring unique characteristics like an elevated degree of breathability and lightness together with a good insulating power at the same time, above all in wet conditions thanksn to the DWR treatment on the outside. The inner surface has a fish-bone shape design and this allows the body moisture transportation away from the skin and at the same time it creates air pockets that helps keeping the body temperature.

Klimatik™

EXTREME (DValpine)

A 3 layer laminated waterproof material with unique characteristics such as a very reduced weight and an optimum breathability and waterproofness thanks to the eVent DValpine microporous PTFE membrane with which is made. The internal is made with a super lightweight material that keeps the membrane isolated from the skin, maintaining the total weight of the material reduced to a minimum, but giving an elevated wearability comfort. High waterproofness and breathbility, DWR finishing on the external surface that protects from the entrance of water.
DWR
Windroof 100%
Waterproof 20.000 mm
Microventilation 0.5l/mq/s
RET <6

GRT 90 2L

Breathable 3-layer lightweight and compact material with membrane. Very high wind and water resistance. Compact and easy to carry in a pocket when not in use, it provides a necessary protection for the rider in many situations.

LAMINATED 3L

3-layer bonded WINDTEX material. The outside layer is smooth and aerodynamic since it is extremely fine and compact and promotes the sliding of the air. The inner surface is made of a soft jersey material that promotes comfort and mantaining of the body temperature. The whole weight of the fabric is kept to a minimum but protects effectively from cold and rainy conditions.

NO WATER ACQUAZERO

The fabric used in the Klimatik collection has a water-repellent treatment with several longlasting effects: it increases the water repellency of the garments, maintaining breathability and lightness even in wet conditions, it blocks UV rays and filth.

PRIMALOFT

The inside lining in polyester padding PrimaLoft is an insulating padding similar to feathers. This material ensures a higher protection against cold temperature with a minimum bulk. It stays dry even in wet conditions and it’s wind resistant whilst keeping the body temperature.

RAIN MICROWAVE WR 3L (DVstretch)

A long research has allowed the development of a laminated and windproof fabric with membrane, eVent DVstretch, featuring unique characteristics like an elevated degree of breathability and lightness together with a good insulating power at the same time, above all in wet conditions thanks to the DWR treatment on the outside. The inner surface has a fish-bone shape design and this allows the body moisture transportation away from the skin and at the same time it creates air pockets that helps keeping the body temperature.

RAINSHELL 2.5

Wind and waterproof fabric, it is highly technological and breathable: the humidity of the body goes out and the body temperature stays constant. Rainshell Antiacqua is compact and extremely resistant, suitable for extreme weather conditions.

W-TECH 2L

Bilaminated elastic fabric. Thanks to the special membrane the humidity of the body goes out and keeps the body in a comfortable well-ventilated microclimate. Its unique composition provides maximum comfort as it is extremely elastic, which means that it fits a wide range of movements on the bike ensuring the best performance in all weather conditions. Water column higher than 10.000mm/24h.

Shorts/Bib

SERIE LP 41

A high compression fabric extremely thin, with a content of 41% of elastomer. Highly breathable and quick drying thanks to his perforated structure.
Weight 155gr/mq.
UPF -

SUPER G.

An elastic 75 mm band with non-slip threads that stays fit to the body with the absolute comfort and no constriction.

SERIE C-BOOST

A polyamide /elastan two-faces fabric specifically built with circular machines to obtain coverage, strength, and low weight. Extra resistance to pilling and high compression.
Weight 200gr/mq.
UPF 50+

SERIE BOND 250

A brand new bonded fabric, extremely thin and with controlled elasticity, recommended for the dye cut application. Used for the straps for its comfortable and supporting effect.
Weight 250gr/mq.
UPF 50+

SERIE S 41 ACTIVE COMFORT

High compression fabric with a content of 41% of elastomer and with a patented construction featuring a reduced thickness that grants pilling resistance, quick drying and a proper compression effect that helps the venous return. This fabric is also available with Active Comfort: WR (water-repellent) treatment on the outer surface of the fabric and hydrophilic on the inside.
Weight 218gr/mq.
UPF 50+

GRIPPER

A lycra with internal antislip material that perfectly adheres to the skin without tightening and it can be dye cut for a higher comfort.
Weight 300gr/mq.
UPF 50+

SHARK

Woven fabric used in the crotch area of the PRR 2.0 bibs and short. It unique texture makes it very breathable and low weight. At the same time it gives a compression effect which reduces the onset of muscle fatigue by supporting the riding effort.
Weight 160gr/mq.
UPF 50+

AERO G.250

Polyamide /elastan fabric with a structured surface that gives a low aerodynamic impact on the outside thanks to the “gulf ball” effect and an elevated muscle compression. The part in contact with the skin enhances the microcirculation with a massage effect during the performance.
Weight 250gr/mq.
UPF 50+

ZAFFIRO

A certified Lycra Power material with high density (“Finezza 40”) used for the parts of the bibshorts where a good muscular compression and a coverage effect are required. It is also used for the parts of the bibs in contact with the saddle thanks to its anti-abrasion properties, compactness and density as well as its multidirectional elasticity. This material has been developed to be performing throughout time and it’s specifically indicated for uses where resistance, comfort and performance are required.
Weight 200gr/mq.
UPF 50+

MATRIX

A certified Lycra Power material with high density (“Finezza 40”) used for the parts of the bibshorts where a good muscular compression and a coverage effect are required. It is also used for the parts of the bibs in contact with the saddle thanks to its anti-abrasion properties, compactness and density as well as its multidirectional elasticity. This material has been developed to be performing throughout time and it’s specifically indicated for uses where resistance, comfort and performance are required. The embossed surface increases the gripper in the saddle.
Weight 200gr/mq.
UPF 50+

LYCRA PERFORMANCE

ALÉ lycra is used in shorts with and without bibs. Its structure is particularly indicated to favour quick drying and the evaporation of humidity. Thanks to its compactness, the fabric is highly covering and supports the muscles.
Weight 220gr/mq.
UPF 50+

MGS 03 WR

Thermic 3 layers fabric. The external layer is elastic and has WR treatment. The elastic membrane is windproof and gives breathability. The interior fleece layer maintains the body temperature and protects against cold.

SUPERROUBAIX® CARBON

effectively manages perspiration remaining highly breathable. The brushed inner surface creates air pockets which isolate the skin from the outside while maintaining body heat. The carbon filament added in the structure gives it its characteristic zigzag pattern. Carbon contributes to the rider’s well being thanks to its dissipative effect against electrostatic charges released into the atmosphere.
UPF 50+.

THERMODREAM, THERMOHIVE

The new winter microfibre handles perspiration and are extremely breathable. The open exterior layer increases the air access and maintains the body temperature at the same time.

X-EVOLUTION M-PLUS WR

Thermic 3 layers fabric. The external layer is resistant to abrasion and has WR treatment. The elastic windproof membrane ITTTAI gives breathability. The interior fleece hydrophilic layer maintains the body temperature and protects against the coldest temperatures.

BLIZZARD BE-HOT ACQUA ZERO

It is a thermic, warming and thermoregulatory fabric. The special structure, with a precious technical thread, generates heat greater than 1°C, reducing the dispersal and maintaining the body temperature.

LEGEND ACQUA ZERO

This resistant fabric creates compression on the muscles. The high percentage of elastomer and the 250 gr weight enable high level performances. The ECO Acquazero water-repellent technology is breathable and protects the garment against dirty.

SUPERROUBAIX®

A winter micro-fibre that effectively handles sweat, still remaining highly breathable. The internal brushed surface creates air pockets that isolate the skin from the exterior, thus retaining the body heat. It is the ideal fabric for tights and accessories, where freedom of movement and thermal insulation are a must. The articles made with Superoubaix® boast a light compression effect that massages the muscle while pedalling.
UPF 50+.

THERMORROUBAIX®

This is an excellent termic insulation fabric.It is a twofaced fabric: the interior in comfortable hollow fibre polyester and the external in strong polyamide. The union of these two breathable fabric gives high level performances.